ECO cleaning machine in the defense sector
A company in the defense sector needs to degrease and dust off painted steel parts. They carry grease and particles that must be removed. Project data: parts that fit the machine’s basket, a maximum load of 500 kg, a suitable detergent, and parts loaded and unloaded by hand.
The parts rest on a stainless steel grid platform 1.1 m in diameter, rotated by a gear motor. Three U-shaped spray ramps (above, below and on the sides) spray the washing solution in a closed circuit. Cleaning combines three actions: mechanical (the jets dislodge the dirt), thermal (heat melts the grease) and chemical (the detergent saponifies fatty substances). The 170-liter bath is electrically heated and fills automatically.
A disc oil skimmer, driven by a weekly timer, collects surface oils so the bath needs draining less often. A proportional doser adds detergent with each water top-up, and an indicator light warns the operator when the detergent drum is almost empty. Vapor extraction keeps vapors from escaping when the lid is opened. A position switch prevents operation with the lid open, and a retention tray with a probe stops the machine immediately in case of a leak. The machine runs without compressed air. The IC4 is the largest model in the ECO range.